JTEKT Intelligent Torque Controlled Coupling (ITCC)

Pinion assit type EPS (JTEKT P-EPS)

motor / ECU resistant to water

JTEKT RP-EPS

motor / ECU resistant to water
torque sensor resistant to water

Messier-Bugatti (includes Carbone Industrie and SEP)

Brakes: Brembo calipers, Carbone Industrie or Brembo carbon/carbon friction material

In order to keep the tyre pressure as constant as possible, essential for their correct working, a revolutionary rim/rubber complex was designed. At first Dunlop Denloes were selected, developed by Dunlop with the intention of producing a tyre closely derived from competition rubber, which even in the event of stripping would not explode or suddenly deflate, with the well-known dramatic consequences for car control (especially at high speeds). These tyres can also be used over long distances even with a puncture (run flat capability), particularly suitable for competition driving. In the definitive road version they were replaced by similar Bridgestones, 235/45 VR 17 8 in. rims in front and 255/45 (275/45 on request) VR 17 10 in. rims in the rear. The 959 alloy rims, with five spokes and a central locking nut, have a tyre pressure monitoring system incorporated. This is based on the hollow spokes which form a single chamber with the tyre itself. At the hub a sensor reads the pressure in the chamber and transmits it to the on-board computer, which cuts in an alarm below a certain pressure.

Bucher De Dion axles with watt linkage and stabilizers

Bucher-Guyer AG Duro 4x4